Ch-899 Chouchin Radio Controlled Clock Instructions __exclusive__ -

Press and hold the [M. SET] button on the back of the movement for approximately 3 seconds. The second hand will stop, indicating it has entered manual mode.

The clock shuddered, its internal mechanisms resetting. It was a digital scramble, a flurry of data processing. It had found it. Through the brick walls, through the trees, through the miles of empty air, the signal from Fort Collins had arrived. The slave had met the master.

If the clock behaves erratically, remove the battery and wipe the metal terminal tabs with a dry cloth or a pencil eraser to remove minor oxidation. Is the clock too fast, too slow, or completely stopped ? ch-899 chouchin radio controlled clock instructions

Weak batteries are the most common cause of signal reception failure.

Locate the time zone selection buttons on the back. Hold down your correct zone button (EST, CST, MST, PST) until the hands move, or perform a full hard reset and select the zone immediately after the hands park at 12:00. The Clock Fails to Synchronize Overnight Press and hold the [M

Sometimes you may be out of signal range (basement, rural area, metal building). In that case, follow these :

Before diving into the instructions, it helps to understand what you’re working with. The Chouchin CH-899 is a digital or analog-digital hybrid radio controlled clock known for: The clock shuddered, its internal mechanisms resetting

He didn't press SET. He waited.