Thread the tap bolts and rubber washers through the rim. Be careful not to overtighten the rubber washers, as they are meant to cushion impact, not be compressed flat.
Assembling the Lifetime Basketball Hoop (Model CB14500) typically takes between one to four hours lifetime basketball hoop assembly cb14500
Lifetime organizes hardware into blister packs or labeled bags matching specific steps in the manual. Do not mix them. Count your bolts, nuts, and washers against the parts list before starting. Setting Up Your Workspace Thread the tap bolts and rubber washers through the rim
However, the CB14500 is not a "pop-up" system. Proper assembly is critical for safety, stability, and a true rebound. Here is your step-by-step guide to getting the hoop in the ground correctly. Do not mix them
Align the backboard brackets with the mounting plate on the backboard. Secure the rim using the provided U-bolts, compression springs, and retainer plates.
Slide the heavy-duty U-bolt through the backboard brackets and secure them using spacers, making sure the U-bolt rests flush within the molded notches.
The Ultimate Guide to Lifetime Basketball Hoop Assembly (Model CB14500)