Pressing the shutter button takes one photo.
- 4.1 Half-Press (Auto-Focus) Function - 4.2 Full-Press (Shutter Release) - 4.3 Bulb (B) Mode Shooting - 4.4 Using as a Standard Remote Shutter
The transmitter and receiver are normally pre‑paired at the factory, so no action is needed for first‑time use. However, if the receiver’s LED does not change to red and the camera does not respond when you press the shutter button, follow these steps: aodelan wtr2 user manual
The WTR2 chirped. A high, piercing sound that cut through the low hum of the station's life support. The screen blazed to life, bright blue text glowing against the black background.
If you prefer a wired setup, connect the transmitter directly to your camera’s remote terminal using the supplied cable. The transmitter then acts as a wired shutter timer without needing the receiver. Pressing the shutter button takes one photo
Below are the key features and operational modes commonly found in its manual: Core Features Wireless & Wired Functionality:
Used for manual long exposures. Press once to open the shutter, and press again to close it. A high, piercing sound that cut through the
Check if the receiver is turned on and the light glows red when you press the button. If it glows red but the camera doesn't fire, the cable is likely loose. LCD is faint: Replace the AAA batteries in the transmitter.