Crawford Cdm9 950 Installation Manual

Derived from common failure points mentioned in the Troubleshooting Guide :

: Disengage the door and manually move it to roughly 1.5 m above the floor, then re-engage it. crawford cdm9 950 installation manual

Verify that the wall and door frame can support the weight and torque of the operator. Tools and Components Checklist Ensure you have the following tools and components ready: Standard metric socket and wrench sets Hex keys (Allen wrenches) Screwdrivers (insulated for electrical work) Spirit level and tape measure Crawford CDM9 950 operator unit Torque bracket and mounting hardware Control unit housing and connecting cables Mechanical Installation Derived from common failure points mentioned in the

: Use the Up/Down buttons in "hold-to-run" mode to move the door until the bottom rubber sealing edge aligns perfectly with your 1 meter mark. The door should be disengaged and positioned 1

The door should be disengaged and positioned 1.5 meters above the floor before engaging and powering on.

Disclaimer: This guide is a summary of typical Crawford/ASSA ABLOY installations. Always refer to the specific, printed manual provided with your unit.

Connecting the power and control cables requires precision to avoid short circuits. Power Supply Connection