The module typically occupies 5 modules of 9mm width (45mm total width).

Install the photo-electric cell outdoors. It must be positioned away from the lights it controls to avoid "cycling" (turning off because it sees its own light). Wiring the Terminals: Terminals 1 & 2: Connect to the 230V AC power supply.

Turn the potentiometer dial slowly until the status LED changes state. Leave the dial at this exact position. 5. Troubleshooting Matrix Potential Cause Remedial Action No power supply to the module.

2 to 2000 Lux (split into multiple operational ranges)

Remote wall-mounted or flush-mounted photoelectric cell (IP54 or IP65 protection rating) 2. Component Layout and Interface Elements