Mcgs Hmi Touch Calibration _best_ -

: Once you have tapped the screen, wait approximately 30 seconds . The system will automatically enter the touch screen calibration utility. 2. Executing the Calibration

: Turn off the 24V DC power to the HMI and then power it back on. Trigger Setup : As soon as the "start" prompt progress bar mcgs hmi touch calibration

Press precisely in the intersection of the crosshair lines. : Once you have tapped the screen, wait

Press and hold the physical boot button (or flip the designated calibration dip switch) while turning the power back on. Hold the button for 3 to 5 seconds until the screen changes. Step 4: Follow the On-Screen Crosshairs Executing the Calibration : Turn off the 24V

Press down and hold until the crosshair moves to the next position (usually 1 to 2 seconds).

On Windows CE HMIs, touch calibration is stored in the registry at: HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH You can export this key to a .reg file and save it to a USB drive. If calibration becomes corrupted, you can import the backup.