Avery Berkel L116 Manual Work Jun 2026

What or behavior is showing on the display screen?

: Clean and check all internal knife-edges, bearings, and linkages for physical wear. Re-calibrate with certified test weights. avery berkel l116 manual work

: Place certified weights equal to half of the scale's maximum capacity onto the center of the platform. Note the error margin. Full-Capacity Test : Add weights up to the maximum capacity. What or behavior is showing on the display screen

(often a small hole on the bottom or side of the unit) and press it with a pin or screwdriver. Navigate to CAL : The display may show . Press the appears, then press to select. Zero Calibration appears, ensure the plate is empty and press Span Calibration : The display will show a required weight (e.g., ). Place that exact weight on the scale and press Save and Exit : Place certified weights equal to half of

Remove all items and containers from the scale platform. Press the Tare or Clear key to return the indicator to standard gross mode. Calibration Protocol (Manual Alignment)

: The platter was weighed down during startup, or an item was removed while a tare was active. Press ZERO or restart the scale.