Cwfl-6000 Manual !free! Jun 2026

Change the cooling water entirely to prevent algae and mineral buildup.

Regularly check the Y-strainer (water filter) for debris, particularly if water flow decreases. 5. Troubleshooting Common Issues Check for bent or blocked water pipes. Ensure the water level is sufficient. Clean the Y-strainer. High Water Temperature Alarm (E03/E04): Ensure the chiller has enough ventilation. Clean the dust gauze and condenser. Check if the ambient temperature is too high. Controller Not Displaying: Check the main power source and fuse. Conclusion cwfl-6000 manual

Press and hold the and "SET" buttons simultaneously for 5 seconds until the display shows 00 . Change the cooling water entirely to prevent algae

Press to enter F3 . Change the value from 1 (Intelligent Mode) to 0 (Constant Temperature Mode) . Press "Rst" (Reset) to save the settings and exit. Adjusting Target Temperature (In Constant Mode) Press the "Set" button briefly. Troubleshooting Common Issues Check for bent or blocked

Maintain at least 50cm between the air outlets (back/sides) and obstacles to prevent overheating.