Fanuc Series Oitf Plus Programming Manual [new] 〈2025〉

This section serves as the dictionary of the control system. It covers:

Details for constant surface speed control and various feed rate overrides. fanuc series oitf plus programming manual

The programming manual details hundreds of codes, but the following are fundamental to most operations: Fanuc 0i-Model F Plus | High Quality CNC Routing System This section serves as the dictionary of the control system

To help tailor further programming information, let me know: fanuc series oitf plus programming manual

If you are performing specialized development beyond standard G-code, these dedicated manuals are necessary: CNC Series 0i-F Plus

| G Code | Group | Function | Modal | |--------|-------|------------------------------------|-------| | G00 | 01 | Positioning (Rapid Traverse) | Yes | | G01 | 01 | Linear Interpolation (Feed) | Yes | | G02 | 01 | Circular Interpolation (CW) | Yes | | G03 | 01 | Circular Interpolation (CCW) | Yes | | G04 | 00 | Dwell (P or X/U address) | No | | G10 | 00 | Programmable Data Input | No | | G18 | 16 | Xp-Zp Plane Selection (Default) | Yes | | G20 | 06 | Inch Input Mode | Yes | | G21 | 06 | Metric Input Mode | Yes | | G32 | 01 | Thread Cutting | Yes | | G40 | 07 | Cutter Compensation Cancel | Yes | | G41 | 07 | Cutter Compensation Left | Yes | | G42 | 07 | Cutter Compensation Right | Yes | | G50 | 00 | Coordinate System Setting | No | | G70 | 00 | Finishing Cycle | No | | G71 | 00 | Stock Removal in Turning (Type I/II)| No | | G72 | 00 | Stock Removal in Facing | No | | G76 | 00 | Multiple Threading Cycle | No | | G83 | 09 | Deep Hole Peck Drilling (Z-axis) | No | | G96 | 13 | Constant Surface Speed Control ON | Yes | | G97 | 13 | Constant Surface Speed Control OFF | Yes | | G98 | 05 | Feed per Minute (mm/min) | Yes | | G99 | 05 | Feed per Revolution (mm/rev) | Yes |