Hold both simultaneously until the indicator lamp turns on.
I can provide the exact exact numeric code sequences for your setup. Share public link
The LED light will flash once and shut off. Test the power and volume buttons to confirm success. Method 2: Manual Code Input (Best for Precise Pairing) huayu rml1316 setup best
: The television must be turned on and fully loaded past its splash screen. Do not try to start programming while the television is on standby.
Locate the code list booklet and find your TV brand. Note the 3-digit or 4-digit codes listed next to it. Hold both simultaneously until the indicator lamp turns on
Includes Smart TV-specific buttons (Netflix, YouTube, etc.).
| Setting | Command | Recommended value | Why | |---------|---------|-------------------|-----| | Steps/mm (X,Y) | $100 , $101 | (if belt) or 400 (if 8mm leadscrew) | Calibrate by moving 100mm and measuring actual | | Steps/mm (Z) | $102 | 400 (leadscrew) | – | | Max rate (mm/min) | $110-112 | 3000 (X,Y), 1000 (Z) | Avoid skipping steps | | Acceleration | $120-122 | 200 (X,Y), 100 (Z) | Smooth starts/stops | | Homing enable | $22=1 | 1 | Required for limit switches | | Homing dir | $23 | 3 (X&Y negative) | Depends on switch placement | | Laser mode (if laser) | $32=1 | 1 | Enables M4 dynamic power | Test the power and volume buttons to confirm success
controller directly at the TV's infrared (IR) sensor.