Note: On some Spreadtrum devices, you might not need a dongle or special box to enter Diag Mode; simply connecting the powered-off device via USB is sufficient .
Inside the tool interface, navigate to the tab and select the exact COM Port number you noted from the Device Manager.
button to verify if the tool can communicate with the phone. Existing information should appear. If the device has dual SIMs, ensure both checkboxes are selected. Type the 15-digit IMEI numbers into the input fields. Write and Finalize button to start the process. write imei r3.0.0.1
: When a device's motherboard or other hardware components are replaced, the new hardware may not have the correct IMEI programmed. The tool can write the device's original, legitimate IMEI onto replacement hardware.
: Have the original 15-digit IMEI number found on the device's box or battery sticker. Note: On some Spreadtrum devices, you might not
Select "Dual SIM" or "Single SIM" as per your device. Enter the 15-digit IMEI number(s) carefully.
Boot the device into . On most Spreadtrum devices, this is achieved by holding down the Volume Up + Volume Down buttons simultaneously while plugging in the USB cable. Open your PC’s Device Manager . Existing information should appear
Clicking the "Read" button will attempt to retrieve the device's current IMEI information. This helps confirm that communication is established and reveals what values are currently stored.