Stihl Fs96 Manual Jun 2026

Briefly squeeze the throttle trigger to release it from the starting lock position. The engine will drop down to idle speed. Warm Start Protocol (Engine has been running recently) Set the ignition switch to START / I . Leave the choke lever in the RUN / OPEN position.

| Maintenance Task | Frequency / Interval | | :--- | :--- | | | Regularly, especially in dusty conditions | | Spark Plug Check/Replace | Regularly, as part of standard maintenance | | Fuel Filter Replacement | As part of the 25-hour / Service Kit 30 maintenance | | General Inspection | Before each use (screws, nuts, damage) | | Mowing Blade Wear Check | Every 25 operating hours | | Mowing Blade Sharpening | As needed, when cutting results deteriorate | stihl fs96 manual

[ H ] <- High Speed Screw (Controls maximum RPM mixture) [ L ] <- Low Speed Screw (Controls acceleration mixture) [LA ] <- Idle Speed Screw (Controls engine speed at rest) Standard Setting (Base Tuning) Briefly squeeze the throttle trigger to release it

Remove the air filter shroud. Wash the wire mesh or foam element in warm, soapy water. Rinse thoroughly, let dry completely, and reinstall. Replace if frayed or punctured. Leave the choke lever in the RUN / OPEN position

Unlike loop-handle trimmers, the FS 96 comes standard with a "Bike Handle" (two-hand grip). This design allows the operator to pivot the machine from the hips using a sweeping motion, reducing fatigue on the arms and back during long work sessions. It provides superior control when using metal blades for cutting heavy grass or reeds.

Pull the starter rope firmly until the engine fires briefly, then immediately move the choke lever to the open position. Pull the starter rope again until the engine runs.