For the PS2251-07 architecture, the following versions are highly compatible: MPALL v3.80 (or newer iterations like v5.03) Download the Matching Firmware Binaries
MPTool requires .bin files (Burner and Firmware) specific to your NAND flash type (e.g., Toshiba, SanDisk, Hynix). phison ps225107ps2307 mptool install
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Phison PS2251-07 (PS2307) Firmware [BN07*.BIN, FW07*.BIN] For the PS2251-07 architecture, the following versions are
Right-click MPALL_F1_7F00_*.exe and select . Insert your USB flash drive into the computer. If you share with third parties, their policies apply
| Common Problem | Likely Cause | Potential Solution | | :--- | :--- | :--- | | | Driver issue or incompatible USB port. | Reinstall USB drivers; use a USB 2.0 port; try a different computer; run tool as administrator. | | Production Fails (Status is Red) | Incorrect firmware file, wrong settings, or incompatible flash chip. | Double-check and reselect the BN and FW files; verify all settings against this guide. | | Capacity is Not Restored | Incorrect partition or format settings. | Restart the process and ensure "Low-Level Formatting" is enabled; set the partition mode to 3 (Removable Disk). |
Select your corresponding NAND flash type (TLC/MLC) found during Step 1. Move to the Flash Setting tab: Check the box for Preformat . Check Firmware Update .