Skip to content
Apply the maximum command signal (10V or 20mA) from the PLC. Adjust the Gain or Span control until the valve reaches its maximum rated operating pressure. Do not over-adjust, as excess current will cause the solenoid coils to overheat. Step 3: Ramp Time Optimization
When the PPC-R22.1 encounters a system anomaly, its integrated status display or linked VisualMotion diagnostics suite will report explicit codes. Follow this structured diagnostic sequence if your system halts: rexroth ppcr221 manual pdf hot
Provides specialized documentation for PPC-R series manuals. Tips for Using the Manual Efficiently Apply the maximum command signal (10V or 20mA) from the PLC