B593s22 Multicast Upgrade Toolexe [patched] -

Do not unplug the data wire or disconnect the power source during this active flash state. Step 5: Finalizing and Verification

With preparations complete, follow these steps to upgrade your B593S22 router to multicast using Tool.exe: b593s22 multicast upgrade toolexe

Click the button inside the Multicast Upgrade Tool. The tool will begin broadcasting the firmware packets across the network line. Do not unplug the data wire or disconnect

| Number of Devices | Unicast TFTP Time | Multicast ToolExe Time | Bandwidth Saving | |------------------|------------------|------------------------|------------------| | 50 | 12 min | 2.1 min | 83% | | 500 | 2.1 hours | 4.3 min | 97% | | 2000 | ~8 hours | 9.8 min | 98% | | Number of Devices | Unicast TFTP Time

Close the tool. Verify your static IP address. Re-open the tool as an administrator, re-select the correct network card, click start, and then power on the router. Router Stuck on Power Light Only (Bricked) Cause: Corrupted firmware or interrupted transfer.